To Top
Advantages of MagnaDRY® Technology

Advantages of MagnaDRY® Technology

Print Email
(1 Vote)

TempMaster has a complete hot gas dehumidification product offering from 3 to 12.5-tons.  MagnaDRY units have the ability to provide the temperature and humidity levels you need with a simple, competitive, energy efficient and reliable design.  

TempMaster has a complete hot gas dehumidification product offering from 3 to 12.5-tons. MagnaDRY units have the ability to provide the temperature and humidity levels you need with a simple, competitive, energy efficient and reliable design. The TempMaster MagnaDRY system combines a high-efficiency heating/cooling unit with a “state-of-the-art” dehumidification system to:

 

    • Provide superior dehumidification at wide range of OD temperatures
    • Provides comfort by providing cooling and/or dehumidification when needed
    • Does not overcool the space
    • Reduce refrigerant transient time to less than 30 seconds with the MagnaDRY design
    • Achieve steady state capacity and efficiency very quickly (competition up to 1 hr or longer)

 

MagnaDRY 3-12.5 tons

 

Purpose of this document is to provide a sell story on the MagnaDRY product family.  Use this document for the following:

  1. The MagnaDRY selling story.
  2. Technological advantages with the 3-5 ton MagnaDry system
  3. Technological advantages with the 6.5-12.5 ton MagnaDry system

 

 

  • The MagnaDRY Selling Story:

 

For many facility owners, a conventional air-conditioning system creates a dilemma – you either get the temperature or the humidity level you want, but not both.  Fraser-Johnston now has a solution to this situation. The MagnaDRY system from Fraser-Johnston uses proven technology to provide the temperature and humidity levels concurrently in one energy-efficient design.

 

Try to imagine the conditions of a cave.  Cold and damp. A cave may be a nice place to visit, however, you would not want to live there.  Neither would your customers. Conventional air conditioning systems are not designed to handle conditions when the temperature is moderate, but the humidity is high.  In these cave-like conditions, users have only two options, and both are bad. They can either endure uncomfortably high humidity levels with a moderate room temperature, or they can lower the humidity level with the unwanted side effect of the space getting too cold.

 

The MagnaDRY Series units provide the answer for both issues.  Instead of either-or, now you can meet temperature and humidity requirements with the MagnaDRY reheat series packaged units.  Superior to conventional air-conditioning dehumidification, MagnaDRY units remove moisture and use a reheat mode of operation that doesn’t rely on expensive electric heat or natural gas.  Because MagnaDRY can remove moisture without increasing sensible cooling, you can maintain temperatures and humidity within the comfort zone without significant added energy cost.

 

Conventional dehumidification systems reheat with natural gas or electricity, methods that aren’t acceptable under ASHRAE 90.1 energy standards.  But thanks to innovative dehumidification technology, the MagnaDRY design meets the ASHRAE 90.1 energy standard. It’s the one specification that solves the temperature/humidity problem with an efficient, energy-saving design for a wide range of applications.

 

The key to utilizing the MagnaDRY reheat series units effectively is to understand the applications that best apply to the MagnaDRY.  Two hurdles you will face include finding the right application and situation for applying the MagnaDRY unit, and second, how to sell the contractor or end user on why they should pay more for a MagnaDry unit, versus buying a conventional RTU.  Let’s start by looking at the applications and situations that are perfect for applying this unit. The key will be to identify the situations while you’re in the field talking with customers or searching for new business.

 

APPLICATION & SITUATION

 

Supermarket:  Cold case door fogs up when a customer opens the display door.  A customer cannot see the food behind the door. The negative impact to sales is similar to what would be experienced if curtains were hung in front of all the items in the canned goods isles.  Grocery store patrons will not buy what they cannot see. Additionally, the customer may keep the door open while making a buying decision, which wastes energy. In either event, the customer could limit their time in the frozen food section, resulting in lower frozen food sales.

 

Dentist/Doctor’s Office:  Often times a large number of patients are in a small waiting room and it is creating uncomfortable high humidity levels and possibly causing window condensation and creating an atmosphere conducive to mold growth. The patients become irritable, and this only increases the tension in a room full of people who would rather be somewhere else.  This ultimately makes the doctor or dentist’s job more challenging when dealing with irritable patients. The only solution the doctor/dentist has is to turn up the air conditioning, thereby decreasing the room temperature.

 

Printing Facility:  Production lines slow down because the high humidity levels are causing the paper to stick together.  The high humidity levels may prevent the ink on the paper from drying properly reducing the quality of the print.  Downtime or reprinting is very expensive.

 

Art Gallery/Museum:  A curator may be concerned that high humidity levels will damage valuable artwork, artifacts, and other valuable objects that may be sensitive to high humidity levels.  The Art Gallery/Museum has a lot of money at risk and the humidity levels, with comfortable temperatures, are vital to the success of that establishment.

 

Fitness/Recreation Center:  Excess humidity caused by body heat is causing the front windows and mirrors to fog up.  Odor levels, mold, and bacteria growth increase with the increase in humidity, which makes for a very uncomfortable and uninviting place for patrons to work out.  This may decrease the participation at the fitness/recreation center.

 

Locker Room:  Showers and saunas increase humidity levels as well as create a damp feeling in the locker room.  These hot, humid, and damp conditions are also perfect for mold and bacteria growth. Mirrors will also fog if the humidity levels are not dealt with properly.  Patrons may find it hard to completely dry off before putting on their street clothes.

 

Food Production Line:  An owner may have trouble with dry food products clumping in machinery due to high humidity levels.  A donut production line applying glazing to the donut may have trouble packaging the donuts if the glazing does not dry properly.  High humidity levels could also promote or increase mold or bacteria growth in food production facilities. This can be a costly problem that would be difficult for a conventional RTU to handle effectively.

 

Banquet Halls/Buffets:  Restaurant owners may have problems with windows fogging due to excessive moisture levels from open food containers and high occupancy loads.  Food odors may also linger, which negatively impact the customers experience at the facility.

 

Laundromat:  The combination of heat and moisture from washer and dryers can cause the room to feel muggy and uncomfortable.  High or uncontrolled humidity levels can also cause window and mirrors to fog.

 

Pharmaceutical Company:  Production managers can have a difficult time keeping drug ingredients dry without overcooling.  If production workers are cold, it could have an adverse effect on worker performance.

 

Summary:   The perfect condition for using MagnaDRY is when the sensible load is low, and the latent load is high, as shown in the examples above.  Remember to review the examples, similar to those mentioned above, when visiting your customers, in order to expand opportunities to assist in solving your customers problems.

 

 

  • Technological Advantages with the 3 to 5-Ton MagnaDRY System:

 

 

 

 

Figure 1: Cooling Mode



Normal cooling operation occurs when discharge gas from the compressor is routed to condensing coils 1 & 2 located in the outdoor condensing section. Compressor discharge gas is condensed to a liquid in the outdoor condensing section and then continues in the system to the TXV (Thermostatic Expansion Valve). As the high pressure liquid goes through the thermostatic expansion valve, the refrigerant is reduced to a low temperature, low pressure gas/liquid. The cool evaporator temperature causes the air forced across the evaporator to a lower temperature/humidity providing a cooling effect . Refrigerant Recovery Valve #2 (Sol 2) is closed during cooling operation to avoid short circuiting condenser coil #2. Refrigerant Recovery Valve #1  (Sol 1) on the reheat coil is opened to allow the refrigerant in the reheat coil circuit to return to the active system. The refrigerant recovery valves may be cycled to maintain refrigerant charge.





 

Figure 2: Reheat Mode



Reheat operation occurs when compressor discharge gas is routed through the reheat coil which is positioned directly downstream of the evaporator coil. When a call for reheat occurs, the 3 -Way Valve (Sol 3) diverts compressor hot gas to the reheat coil while condensing coil 1 and the reheat coil are active and the condensing coil 2 is inactive. Note: condensing coil 1 and condensing coil 2 are of equal size and volume. The reheat coil is approximately equal in volume to condenser coil 2. Refrigerant Recovery Valve #2 (Sol 2) is opened allowing refrigerant to return to the active system. Refrigerant Recovery Valve #1 (Sol 1) is closed to eliminate short circuiting during reheat operation. In each mode of operation a condenser fan motor speed control is used to control the compressor discharge pressure. The refrigerant recovery valves may be cycled to maintain refrigerant charge.

 

 

  • Technological Advantages with the 6.5 to 12.5-Ton MagnaDRY System:

 





 

 

Figure 3: Cooling Mode



Figure 3 shows the piping diagram and refrigerant flow in the cooling mode for the 6.5 to 12.5-ton MagnaDRY units.  The 6.5 to 12.5-ton units use an evaporator coil, one reheat coil, and one condenser coil and are designed to operate in conjunction with separate AC only cooling system within the same unit.  In the cooling mode, solenoid valve #1 opens, and solenoid valve #2 closes. Refrigerant flows from the evaporator coil to the compressor as a low temperature, low pressure vapor. After the compressor, the refrigerant becomes a high pressure, high temperature vapor and flows through the condenser coil. The refrigerant condenses back into a high pressure liquid and flows through the txv valve.  The txv valve allows the refrigerant to flash into a low pressure, low temperature refrigerant as it moves into the evaporator coil. Where the cycle is repeated.



 

 

Figure 4: Reheat Mode



Figure 4 shows the piping diagram and refrigerant flow in the reheat mode for the 6.5 to 12.5-ton MagnaDRY unit.  In the reheat mode, solenoid valve #1 closes, solenoid valve #2 opens. Refrigerant from the condenser coil flows back through solenoid #2, through the accumulator to the compressor.  The reheat valve switches positions and the refrigerant, as a high pressure, high temperature vapor flows through the reheat coil. The reheat coil now acts as the condenser coil. The refrigerant now flows through the check valve and txv valve.  The txv valve allows the low temperature, high pressure liquid to flash into a low pressure, low temperature vapor as it enters the evaporator coil. The change from cooling mode to reheat mode takes only a matter of seconds.

Last modified on Friday, 26 April 2019 17:40

90279 comments

  • Smart Carts

    Smart Carts

    27 September 2020 | Comment Link

    I think that what you published was actually very reasonable.
    However, consider this, suppose you typed a catchier title?
    I mean, I don't wish to tell you how to run your blog,
    but what if you added a title that makes people desire more?
    I mean Advantages of MagnaDRY® Technology is a little boring.
    You should glance at Yahoo's home page and watch how they create article headlines to grab viewers to click.
    You might try adding a video or a related picture or
    two to get people interested about what you've written. Just my opinion, it might bring
    your website a little livelier.

  • PaulGen

    PaulGen

    27 September 2020 | Comment Link

    metformin tablets where to buy amoxicillin 500 mg tablets buy silagra 10mg buspar proscar cheap

  • 1xbet mobil versiyon

    1xbet mobil versiyon

    27 September 2020 | Comment Link

    suresiyle kullan?labiliyor. 1xbet mobil versiyon
    • Kredi Kart?
    Visa kartlar?n?z ile 10 TL, Manager Card ile 15 TL
    alt limitle part yapabilirsiniz. Principal Playing-card sahibiyseniz 5 TL
    uzeri tutarlar? cekebilirsiniz.
    • WebMoney
    WebMoney yontemini kullan?yorsan?z 3 TL alt limitle consign, 5 TL ve uzeri tutarlarla da cekim talebi verebilirsiniz.


    • EcoPayz
    Lowest 3 TL ile yat?r?m, maksimum 5 TL ile cekim yapabilirsiniz.

    • AstroPay
    3 TL ve uzeri tutarlar? yat?rabiliyorken 5 TL ve uzerindeki tutarlar icinde cekim talebi verebilirsiniz.


    • Paykasa
    Kulland?g?n?z odeme yontemi Paykasa ise 3 TL alt limitin uzerindeki tum tutarlar?

    an?nda yat?rabilirsiniz. Cekim talebi icin minimum islem tutar?
    5 TL’dir.
    • PayKwik
    Yaln?zca partial payment islemleri icin 3 TL alt limitle kullan?labilmektedir.


    1xbet Honorarium ve Promosyonlar? http://cgi.www5b.biglobe.ne.jp/~leen/cgi-bin/bbs/yybbs.cgi/%20resu

    Her yeni bahis sever gibi Turkler icinde bonuslar en onemli k?s?md?r.
    1xbet bahis sitesi de bunu en iyi sekilde sunmaktad?r.


    • Hos Geldin Bonusu
    Uyeliginizi act?ktan hemen sonra yapacag?n?z
    ilk lees islemine sunulan bonustur. En fazla 300 TL’ye kadar
    yararlanabileceginiz bu promosyondan %100 oran?nda yararlanabilirsiniz.

    • PromoCode Bonusu
    • Trade mark mailgram Bonusu
    • Y?ld?z Jackpot Promosyonu
    • Bahis Kuponlar? Savas? Turnuvas?
    • 1xRace Bonusu
    • Dogum Gunu Bonusu
    1xbet Musteri Hizmetleri

    1xbet canl? destek hizmeti sunuyor ancak bunun haricinde
    de cok ilginc bir dan?smanl?k hizmeti veriyor. Her bahis sitesinde gordugumuz mesaj yoluyla ulas?m, despatch yordam?yla
    adresinden iletisim mumkun. Bunlar?n haricinde ise yurt ici servis numaras?yla musterilerine telefon destegi sunuyor.

    1xbet Guvenilir Mi?

    Bahis oynatma lisans?n? Curacao uzerinden alm?s olan 1xbet Meagre sirketi
    Turkiye’nin koklu platformlar? aras?nda bulunuyor. Lisans?n?n haricinde de GoDaddy taraf?ndan saglanm?s olan SSL sertifikas?n?n aktif oldugunu gorebiliyoruz.

    1xbet Genel Degerlendirme 1xbet uygulama

    1xbet guncel giris adresi ise 1x-turkey.com olarak guncellendi.

    Bahis dunyas?nda ayr?cal?kl? bir bahis yelpazesini bir araya getiren sirketin gerek bonuslar?yla, gerek an?nda
    odeme yontemleriyle gerekse guvenilirligiyle dikkat cekmeye devam ettigini soyleyebiliriz.

  • JudyGen

    JudyGen

    27 September 2020 | Comment Link

    flagyl 250 mg tablet metformin tablet cost flomax bph benicar 437 citalopram proscar order online can you buy elimite over the counter tadalafil 20 mg best price buy lasixonline inderal 100mg

  • ZakGen

    ZakGen

    27 September 2020 | Comment Link

    effexor 70 mg paxil libido sildenafil 50 mg mexico

Leave a comment

HSI Comfort. © All Rights Reserved 2019-2025. Website Developed & Hosted by NV Creative Firm